Draytek Vigor VigorAccess Przewodnik Instalacji Pobierz pdf (Strona 27)

VigorAccess Installation Guide

(

)

The PSTN splitter should be connected to MDF on building. An MDF is usually placed in

the building’s telephony room or wiring closet. MDF can terminate the outside telephone

line into the building. In general, the LINE and PHONE interface on the Master device

will connect to MDFs respectively and then to outside connection.

The traditional connection via MDFs for the phone set used in family is shown as the

following picture. The telephone set must connect to one port (in this case, Port 1) of

MDF-1, meanwhile that port must connect to corresponding place of MDF-2. Next, the

other end of Port 1 (in MDF-2) will connect to PSTN.

An example for MDF connection through VigorAccess is shown as the following picture.

For different applications, you have to can change the connection according to the real

circumstance that you encounter.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 44 45

Brak uwag

Draytek Vigor VigorAccess Przewodnik Instalacji Strona 27